Flagler Corporation Cleatmaster Machinery

Cleatmaster Machinery

Flagler High Speed Quadformer

Specifications:

Shown with Optional Quad-Cutter Slitting Attachment

Standard with re info rced "S" Cleat & 1 1/8" Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for auxiliary rolls

Speed: Approx. 100 feet per minute.

Motor: 5 HP 230/460/3/60/1800 RPM .

Drive: Double Vee Belt.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 68" long, 27" wide, 48" high,

Shipping Weight: Approximately 1200 pounds.

Flagler Model "S" Cleat

Specifications:

Standard with Boot Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling.

Speed: Approx. 100 feet per minute.

Motor: 5 HP 230/460/3/60/1800 RPM .

Drive: Double Matched Vee Belt.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 68" long, 24" wide, 48" high.

Shipping Weight: Approximately 1050 pounds.

Flagler Model Mini Cleat

Specifications:

Standard with 1/2" Standing “S” Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling.

Speed: Approx. 100 feet per minute.

Motor: 7 1/2 HP 230/460/3/60/1800 RPM .

Drive: Double Vee Belt.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 74" long, 24" wide, 48" high.

Shipping Weight: Approximately 1200 pounds.

Shipping Weight: Approximately 1050 pounds.

Flagler Model Drive Cleat

Specifications:

Standard with 1 1/8” Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling.

Speed: Approx. 100 feet per minute.

Motor: 5 HP 230/460/3/60/1800 RPM .

Drive: Double Matched Vee Belt.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 68" long, 24" wide, 48" high.

Shipping Weight: Approximately 1050 pounds.

Optional Tooling for all 10 and 12 Station Machines listed above:

½” Female Button Lock Rolls (20-30 Ga.)
½” Male Button Lock Rolls (20-30 Ga. )
5/16” Pittsburgh Rolls (20-28 Ga. )
3/8” Pittsburgh Rolls (20-28 Ga. )
1 1/8” Drive Cleat Rolls (20-28 Ga. )
1 1/8” Drive Cleat Rolls with Slitter (20-28 Ga.)
5/8” Tap-In (3 in 1) (22-28 Ga.)
5/8” End Cap Rolls (22-26 Ga.)
½” Tap-In (3 in 1) (22-28 Ga.)
½” x 180° Hem Rolls (20-28 Ga. )
½” Hem x 5/8” Kick Rolls (24-28 Ga.)
3/8” Hem x 1/2” Kick Rolls (24-28 Ga.)
½” Double Seam Rolls (16-20 Ga.)
3/8” Double Seam Rolls (20-28 Ga.)
7/16” Right Angle Flange Rolls (20-28 Ga.)
¾” Standing Seam Rolls (20 Ga.)
Full Reeves Rolls (Male and Female)
Modified Reeves Rolls (Male and Female)
5/16” Pitts. Button Lock (Male and Female)
5/8” x 1” Boot Cleat (26-28 Ga. )

Flagler Model 1" Standing S

Specifications:

Standard with 1” Standing “S” Cleat Rolls in the center position. There are (2) sets of extended shafts for optional tooling

Speed: Approx. 60 fpm (optional 100 fpm)

Motor: 7 1/2 HP 230/460/3/60/1800 RPM .

Drive: #60 Roller Chain.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 130" long, 32" wide, 48" high

Shipping Weight: Approximately 3,500 pounds.

Auxiliary Tooling Available

1 ½” Standing Seam Rolls (16-20 ga.)

1 ¼” Standing Seam Rolls (18-22 Ga. )

1 1/8” Tap-In (3 in 1) (18-22 Ga. )

1/2” Pittsburgh Rolls (16-20 ga.)

3/8” Pittsburgh Rolls (18-22 ga.)

5/16” Pittsburgh Rolls (20-26 ga.)

Options Listed Below must be Factory Installed

Duct Flange 1 Rolls with Short Parts Feeder

Variable Drive (0-100 fpm)